Preview. This site shows draft content that a qualified electrician has not reviewed yet. Do not rely on it.

Blog · Electrical Safety

Signs your fuse box needs replacing

20 November 2026

The consumer unit, often called the fuse box, is where the electricity supply is split into the circuits that run your home. Its job is to cut the power fast when something goes wrong. Older units do this less well than modern ones.

Signs to look for

  • Rewirable fuses. If your fuses hold a piece of fuse wire, the unit is decades old.
  • No RCD. An RCD cuts the power in a fraction of a second if it detects current leaking to earth. Look for a switch with a button marked T or Test. No test button usually means no RCD.
  • A wooden or cast iron backing. These belong to much older installations.
  • Frequent tripping. Circuits that trip often can point to a worn unit or to faults on the circuits.
  • Heat, scorch marks or a burning smell. Treat this as an emergency and call an electrician now.
  • A failed inspection. An electrical inspection report may list the unit as needing replacement.

What to do now

Do not remove the cover or touch anything inside the unit. An electrician can inspect it and tell you whether it needs replacing or is safe to keep.

If your RCD keeps tripping, read our guide to the safe checks you can do first.

Not sure what you have? Send us a photo of your fuse box and we will take a look.

Not yet reviewed by a qualified electrician.

Related faults

Related services

Not sure what you have?

Tell us what you have noticed and we will take a look.

Not set yet: phone number, WhatsApp number, response time, area covered. Add them in src/config/site.ts. Until then the quote form is the only contact route shown.